Tavda plywood industrial complex

На главную Поиск, Карта сайта Отправить письмо

+7 (343) 287-71-14
+7 (34360) 3-00-30


faneraM FSF2Mark: Exterior (FSF)
GOST №: 3916.1-96
Size,mm: 1525х1525
Thickness,mm: 3, 4, 5, 6, 8, 10, 11, 12, 15, 18, 20, 21, 25, 24, 27, 30, 35, 40


Plywood is produced from the birch 
Formaldehyde emission class Е-1
Sanded (S2S), except grade IV/IV and the thickness from 21 mm.

Birch Exterior plywood - a high-quality construction material which has high strength and advanced moisture resistance. Due to the specific resin, Exterior plywood properties are not changed in high humidity conditions, it doesn’t neither deform nor soak.

The Exterior plywood is applied in both indoor and outdoor works. It consists, similar to other plywood, from uneven number of plies of veneer that are glued between each other by the specific phenol-formaldehyde resin.

The veneer from birch or softwood of small thickness is used in production of this plywood. It is produced at high temperature and pressure. The result is the sheet of plywood, that is being cooled, marked and packed. It has the high degree of flexural and tensile strength, durability and high period of operation.

The Exterior birch Plywood has a fine texture, easily processed and combines with finishing materials  and stands against water. The optimum scope of application are indoor and outdoor and means of transport construction and finishing, furniture and parquet floor production, packaging materials.

The main advantages:

•     100% birch veneer
•     Enhanced water resistance;
•     Hardness of the surface;
•     The wide range of thicknesses and sizes;
•     Outstanding toughness and durability;
•     The unique ability to bear heavy loads;
•     Temperature drop resistance from -40 to +50 °C/


  • •    Construction
  • •    Means of transport production
  • •    Furniture
  • •    Packaging
  • •    Others

Technical parameters

Format, mm (ft.)

1220х2440х1220 (4х8х4)
1250х2500х1250 (4х8х4)
1500/1525х2500 (5х8)
1500/1525х3000/3050 (5х10)

Thickness, mm



I (B, S), II (BB), III (CP), IV (C)

Surface quality

2 sides sanded (S2S), one side sanded (S1S), non-sanded (NS)

Formaldehyde emission class


Moisture resistance


Density, kg/m3


Humidity, %


Strength parameters

Shipping of adhesive layer 1,5
Tensile strength along fibers MPa 25
Ultimate flexural strength along fibers of the outer layers, MPa 30
The elastic modulus of flexural strength along fibers MPa 7000